LAN Cabling: Crossover cable

Both the T-568A and the T-568B standard Straight-Through cables are used most often as patch cords for your Ethernet connections. If you require a cable to connect two Ethernet devices directly together without a hub or when you connect two hubs together, you will need to use a Crossover cable instead.
RJ-45 Crossover Ethernet Cable

Crossover cable pinouts







In practice, it does not matter if your Ethernet cables are wired as T568A or T568B, just so long as both ends follow the same wiring format. It is just as valid to make a four-pair crossover using T568A, or a two pair crossover using T568B, as it is to wire them the way shown here. Typical commercially available "pre-wired" cables can follow either format depending on who made them. What this means is that you may discover that one manufacturer's cables are wired one way and another's the other way, yet both are "correct" and will work. In either case, T568A or T568B, a normal (un-crossed) cable will have both ends wired according to the layout in the first connections column.